
The worktop makes the kitchen.
Worktops in Okite and Santamargherita quartz, Florim ceramic slabs and natural stone from our warehouse. We measure, cut and finish them in our workshop in Sibiu.
Three materials, one workshop
Quartz, ceramic or stone?
We work all three, on the same machines. The difference is in how they look, how they behave every day and how unique you want the slab to be.
Quartz
Engineered surfaces made in Italy: non-porous, stain-resistant, with a consistent pattern from slab to slab. Dozens of colours, from pure white to Calacatta looks.
See the colours →Florim · large slabsCeramics
Porcelain stoneware slabs up to 160×320 cm, thin and very hard. They don’t fear heat, and worktop, wall and floor can come from the same collection.
See the colours →From our warehouseNatural stone
Marble, granite, quartzite, travertine. Every slab is unique: you choose it in person at the warehouse, and we lay the worktop out on the slab following the veins.
See the colours →In short
How they behave in the kitchen.
For guidance only. For your colour and your slab, ask us: we’ll tell you honestly what works and what doesn’t.
| Quartz | Ceramics | Natural stone | |
|---|---|---|---|
| Look | consistent from slab to slab; many marble looks | any look: marble, stone, concrete, wood | unique; natural veins and crystals |
| Stains (wine, coffee, oil) | very good: non-porous surface | very good: practically non-absorbent | granite good; marble needs sealing |
| Heat | use a trivet under hot pans | very good | granite good; marble with care |
| Scratches | good | very good | granite very good; marble scratches |
| Usual thicknesses | 1.2 · 2 · 3 cm | thin slabs, with an applied edge | 2 and 3 cm |
| Care | water and neutral detergent | water and neutral detergent | neutral detergent; sealing every 1–2 years |
Inspiration
Kitchens we love.
Illustrative images and manufacturers’ photos. We show them to help you choose a style; your worktop is cut to your measurements.
Illustrative image
Illustrative image
Photo: Santamargherita
Illustrative image
Illustrative image
Photo: Florim
Illustrative image
Illustrative image
Photo: Santamargherita
Illustrative image
Illustrative image
Photo: Florim
Illustrative image
Illustrative image
Photo: Santamargherita
Illustrative image
Illustrative image
Photo: Santamargherita
Illustrative image
Illustrative image
Photo: Santamargherita
Illustrative image
Illustrative image
Photo: Okite
Illustrative image
Illustrative image
Photo: Okite
Illustrative image
Illustrative image
Photo: Okite
Illustrative image
Illustrative image
Photo: Okite
Illustrative image
Illustrative image
Photo: Okite
Illustrative image
Illustrative image
Photo: Okite
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative image
Illustrative imageDetails matter
What goes into a worktop.
Sink cut-out
Top-mounted, undermounted or flush. The cut-out edges are finished like the rest of the worktop.
Hob cut-out
The hob can sit on top of the worktop or flush with it, in a milled rebate.
The edge
Straight, bevelled, rounded or with a drip groove. See them all at Finishes and edges.
The splashback
The panel between the worktop and the wall units, from the same slab, so the pattern continues up the wall.
The “waterfall” island
The worktop runs down the sides to the floor, mitred at 45°, like a single block.
Thickness
Usually 2 cm or 3 cm for stone and quartz; ceramic slabs are thinner and get an applied edge.
How we work
From measurements to the finished worktop.
- I
You send us the measurements
By phone or on WhatsApp. A photographed pen sketch is enough.
- II
Choose the slab
Come to the warehouse, Monday to Saturday, and see the stone in person.
- III
The cutting plan
We lay the pieces out on the slab so the veins flow and as little as possible is left over.
- IV
Cutting and finishing
We cut by machine, then make the edge and the chosen surface finish.
- V
Collect the pieces
Usually within 2–3 working days of choosing the slab.
Got your kitchen measurements? Send them to us.
Length, depth, where the sink and hob go, plus the material you like. A photographed sketch is enough.